Fitzgerald Black Label Case w/Standard Foam Trays

The Battle Foam Black Label Cases are made from ultra high-strength polypropylene copolymer resin. They feature a gasketed, water and dust tight, submersible design. They also feature a latch system, comfortable, ergonomic snap-down rubber over-molded grip handle and automatic pressure equalization valve. They are resistant to UV, solvents, fungus, corrosion and impact damage.

This case can fit 7 inches of Fitzgerald Black Label size foam trays. With this load out option, you will receive the following foam trays:

2x Fitzgerald Troop Foam Tray - 2 inch (50 mm) thick tray with 24x 1 x 1 inch (25 x 25 mm) cut outs, 9x 1 1/2 x 1 1/2 inch (38 x 38 mm) cut outs, 6x 2 3/4 x 1 1/4 inch (70 x 32 mm), 3x 2 3/4 x 1 1/2 inch (70 x 38 mm) cut outs, 1x 2 1/4 x 1 1/4 inch (57 x 32 mm) cut out, 1x 3 1/4 x 2 1/4 inch (83 x 57 mm) cut out and 1x 3 1/2 x 2 1/4 inch (89 x 57 mm) cut out.

1x Fitzgerald 2.5 inch (63 mm) thick Pluck Foam Tray with wheel etchings. The pluck foam pieces are 3/4 inch (19 mm) squares. At times, pluck foam trays may require an exacto blade to cut through portions of the foam.

1x Fitzgerald Foam Topper

Tray Dimensions - 20W x 11L" (508W x 279L mm)

Inside Case Dimensions - 20W x 11L x 7H" (508W x 279L x 178H mm)

Due to the wheels on this case, the bottom tray must be a Fitzgerald Black Label foam tray with wheel etchings.