Tripoli Black Label Case w/Standard Foam Tray

The Battle Foam Black Label Cases are made from ultra high-strength polypropylene copolymer resin. They feature a gasketed, water and dust tight, submersible design. They also feature a latch system, comfortable, ergonomic snap-down rubber over-molded grip handle and automatic pressure equalization valve. They are resistant to UV, solvents, fungus, corrosion and impact damage. A one inch spacer is provided to fill extra space on the side of the case. This space can also be used for storing books or other gaming accessories.

This case can fit 8.5 inches of Tripoli/Nimitz Black Label size foam trays or 17 inches of Tripoli/Nimitz Black Label half size foam trays. With this load out option, you will receive the following foam trays:

2x Tripoli/Nimitz Troop Half Foam Tray - 2 inch (50 mm) thick tray with 36x 1 x 1 inch (25 x 25 mm) cut outs and 6x 2 x 1 inch (50 x 25 mm) cut outs.

2x Tripoli/Nimitz Large Model Half Foam Tray - 2 inch (50 mm) thick tray with 6x 1 1/2 x 1/2 inch (38 x 38 mm) cut outs, 3x 2 1/4 x 1 1/2 inch (57 x 38 mm) cut outs, 2x 2 x 1 1/2 inch (50 x 38 mm) cut outs, 1x 2 1/4 x 2 inch (57 x 50 mm) cut out, 2x 2 x 1 3/4 inch (50 x 44 mm) cut outs, 2x 2 x 2 1/2 inch (50 x 63 mm) cut outs and 2x 3 1/4 x 2 inch (83 x 50 mm) cut outs.

1x Tripoli/Nimitz 3.5 inch (89 mm) thick Pluck Foam Tray with wheel etchings. The pluck foam pieces are 3/4 inch (19 mm) squares. At times, pluck foam trays may require an exacto blade to cut through portions of the foam.

1x Tripoli/Nimitz Foam Topper


Tray Dimensions - 20W x 13.75L" (508W x 349L mm) or 13.75W x 10L" (349W x 254L mm)

Inside Case Dimensions - 20W x 14.75L x 8.5H" (508W x 375L x 216H mm)

Due to the wheels on this case, the bottom tray must be a Tripoli/Nimitz Black Label foam tray with wheel etchings.